If you make the most common maintenance errors, your swimming pool costs could be high. Like a car, pools and spas require regular maintenance. To keep them safe and in good condition, they require basic maintenance Designer Custom Pools. The problems arise when you do not perform routine maintenance.
1. Check the Water Chemistry Weekly
First, you should always test your water.
Test strips are recommended as they give a very accurate result, and are also easy to use. Test for pH (potential hydrogen), free chlorine, cyanuric, acidity, calcium hardness and total dissolved solids. Also, test for copper, iron, and salt water.
You need to act quickly to restore the balance of water chemistry as soon as you notice an imbalance. Your pool will quickly deteriorate without correcting the problem.
Preventing a problem is always cheaper than fixing it. A good pool maintenance plan can reduce your pool’s operating costs.
2. Shower before Swimming in Your Pool
Our bodies are contaminated by dead skin, sweat and hair, as well as pharmaceutical products. You will be able to wash away all dirt and contaminants from your body if you do not shower before swimming in a pool. As a result, the chlorine in the pool water is consumed by the dirt on your body.
Ask everyone who uses your pool to quickly shower with soap in order to remove any sweat or pharmaceutical products. Girls should remove their cosmetics or skin creams, as they quickly dissolve in the water. It will help to keep your pool cleaner and less prone to needing extra chemicals.
3. Clean the filter regularly
Filters in swimming pools can become dirty very quickly, especially during the summer when the pool is being used. Filters that are dirty will cause the flow of water through the filter system to be reduced, causing the pump to have to work harder.
A pressure gauge will be installed on the filter to indicate the pressure of the water inside when the pump is running. The filter needs to be cleaned when the pressure rises above a certain threshold.
Cleaning your filter more often will improve filtration and keep your water cleaner, reducing the need for additional chemicals.
4. Broom your pool surfaces
Calcium scale, dirt and alga can accumulate on pool surfaces.
Automatic cleaners don’t always remove dirt efficiently. Manually brushing the wall with a poolbrush on a telescoping rod is not an alternative.
As part of your routine maintenance, brush the pool surface. Don’t forget to clean the corners, steps and ladders. You will be rewarded with a pool that is free of algae and other contaminants if you put in a little effort.
5. Add Chemicals to the Night
The sun’s UV rays and heat can damage pool chemicals, especially chlorine. Smart pool owners only add chemicals in the evening, after the sun sets. The chemicals can work all night without the sun destroying them. The chemicals should be circulated and mixed in by running the pump for a few hours.
6. Use the filter in off peak periods
To use off-peak power, all swimming pool pumps must be connected to their own electricity meter. Off-peak electricity is generally outside of the peak hours, which are 6am-9am and 4pm-9pm. You can save hundreds of dollars a year by using off-peak power.
7. Covers for sale
By saving water, chemicals, and electricity you can reduce the cost of operating your pool by using a pool cover.
A pool cover is not only for keeping leaves, sticks and other debris from the pool. A cover can reduce water evaporation and preserve pool chemicals. It will also keep the water warm by preventing heat loss.
8. Installing a variable speed pump
Variable speed pumps have improved the technology of swimming pool pumps. These pumps automatically adjust their speed to the load required to run the filters. Saving electricity with a variable speed pump can reduce the cost of running your pool.
9. Installing a Glass Pool Fencing
The glass swimming pool fences can help protect the water from the wind, which can cause it to cool. These fences stop debris and leaves from blowing into your pool, reducing the amount of filtration you need.
The stylish, modern look of the glass is what most people love about glass fences. These fences will make your backyard more beautiful and increase the value of your property.
10. Install LED Lighting
LEDs consume 80% less energy than conventional incandescent bulbs, lowering your electricity bill. LEDs also have other advantages, such as producing less heat and emitting better-quality light. The bulbs are usually smaller, easier to install and have a long life. LED lights last up to 15 years without needing replacement.