How to choose a water softener

First, ensure you select the right size water softener for your household.

The ideal size for a water softener should be determined by the property’s dimensions and potential number of people. This will ensure soft water is always available and the regeneration process will not be halted. Recommended reading?

If you decide to move, the softener can be used as a selling point. Many people are so used to soft water that they will replace the softener in their new home if it doesn’t have one. You don’t have to use a water softener that is too big for your needs. It can be adjusted to your specifications.

An average person uses 160 litres of water per day. Knowing the capacity of the softener allows you to determine how many people it can handle, the size of your dwelling, and whether it is enough. The minimum time between regenerations should not exceed 2 days. The UK has a standard water hardness of 20 degrees Clarke. A 10 litre softener with a capacity of approximately 1500 litres would be sufficient for a family of 4.

A softener 18 litres in size would be sufficient for 8 people, or a house with 4 bedrooms.

A domestic water softener must be regenerated once it reaches its maximum capacity. This is simply where the resin is flushed with a salt solution. The hardness minerals (calcium and magnesium) are removed by the resin from supply water by sodium. Any excess is also washed away at the end of the process. It is important to consider the time between each successive softener regeneration.

The cheapest option is a timer-controlled valve. The user can program the softener to undergo a regeneration at predetermined intervals (e.g. The softener is programmed by the user to go through a regeneration at set intervals, i.e. every second or third day regardless of how much water was used. When water consumption and residents are fairly constant, timer control can be used.

This has the disadvantage that if water consumption increases rapidly, resin can become exhausted and water becomes hard. However, if the house is not occupied, such as for holidays, it will still regenerate at its pre-set time unless it is reprogrammed. The salt will be used more often than necessary, but it won’t have an adverse effect on the softener.

A meter-controlled valve is the second choice and the most popular in the domestic market. This type of valve has a predetermined capacity and reserve that will trigger a regeneration whenever it is reached, regardless of how long ago. These units work best when water usage is fluctuating or prolonged periods of no or little use. Holiday home. A meter-controlled softener provides more flexibility and the best use of salt.